|
Post by x90rider on Mar 31, 2007 6:28:02 GMT -5
|
|
|
Post by xsyamahadg on Mar 31, 2007 7:18:21 GMT -5
|
|
|
Post by peter on Mar 31, 2007 13:54:13 GMT -5
excellent job X90 !! i only have the leccy drill and wire brush attatchment , which are somewhat limited to say the least ... so will you be taking orders for specialist finishings ?? ;D
|
|
|
Post by x90rider on Mar 31, 2007 21:51:33 GMT -5
Peter, I have been known to make a few samples for special occasions.
|
|
|
Post by peter on Apr 1, 2007 12:43:07 GMT -5
hmmm ... decisions , decisions , but maybe something subtle on the top tripple tree ? OHIO would be good !! ;D
|
|
|
Post by x90rider on Apr 4, 2007 7:28:54 GMT -5
My new Dremel tool has arrived. We are waiting for the Riggers to unload it and get it into the building. This is not a hand held tool, it weighs about 30,000 pounds.
|
|
|
Post by xsyamahadg on Apr 4, 2007 7:35:32 GMT -5
Yup, I'd say it is not hand held.
|
|
|
Post by buck12ga on Apr 4, 2007 11:56:07 GMT -5
Okay, what is it? : )
|
|
|
Post by x90rider on Apr 4, 2007 15:23:30 GMT -5
It's a huge Dremel tool. I put a paint can on the table for size comparison. Modern Technology - computer controlled with a 12,000RPM spindle. It holds 30 tools and changes them in less than a second.
|
|
|
Post by xsyamahadg on Apr 4, 2007 17:25:14 GMT -5
Now, I'd say that is awesome !! X-90 do you get to play around with it ?
|
|
|
Post by x90rider on Apr 4, 2007 18:07:39 GMT -5
|
|
|
Post by bruce on Apr 4, 2007 20:22:17 GMT -5
Wow! Now I have tool envy.
|
|
|
Post by buck12ga on Apr 5, 2007 13:21:18 GMT -5
Wow! Now I have tool envy. Me too. What can we make now? ;D
|
|
|
Post by x90rider on Apr 5, 2007 14:51:43 GMT -5
Any thing that we need.
|
|
|
Post by buck12ga on Apr 5, 2007 15:17:24 GMT -5
You could make a whole motorcycle, almost. Buck
|
|